Two Common Tent Poles Types You Need To Know
fiberglass rod
Fiberglass Rods
December 17, 2019
FRP Pultruded
Two Important Trends for FRP Pultruded Profile Manufacturers in 2020
February 21, 2020
Show all

Two Common Tent Poles Types You Need To Know

A couple of additional poles in your camp kit opens up a universe of haven of opportunities. You can expand the awnings on your current tent (most pole tents have a type of passage fold that can be broadened along these lines), construct a protected open-air dining space, shut out the breeze, or make shade on hot days. You may likewise be hoping to supplant damaged poles or parts. If this is the first occasion when you’ve investigated the scope of tent poles, you might be a little surprised over which ones will match your needs. To know your needs, fiberglass tent pole manufacturers may help you.

The beneficial aspect is that except if you have a specific need, most poles are going to serve a similar purpose. The decision truly comes down to which material you need, and what length you need.

Upstanding Poles

These are accessible in a heap of brands, sizes, and operations. However, by the day’s end, they all almost do the very similar thing – bolster your camping cover.

You can carry around tent poles instead of the square as they are easy on fabrics. Also, they are anything but difficult to deal with and are compatible with various fittings that enable you to add to your shelter.

They come in both alloy and steel materials and usually have a ‘nozzle’ atop the pole. A ‘spigot’ is the pointy end that fits through your tent’s eyelets or covering, or through the end cap of a ridge or spreader shaft.

A large portion of these is flexible, with the combination poles generally including either a twisted lock or cam lock system. The steel shafts typically have a wing or ‘T’ nut lock. There are a few units that have fixed length poles that fold down into 3 segments.

A few FRP pultruded profiles manufacturers produce their own pole packs to suit their tents. However, there are entire exchangeable with the main variations being the material along with the flexible lengths.

Spreader or ridge poles

A ridge shaft empowers you to make a rigid top on your canopy or tarp to enable adequate water run-off instead of having it pool in hanging areas of your shelter. These are quite often linked to two upstanding poles to make a frame that will support your shelter. The nozzle ends of the upright poles fit through the openings at each finish of these ridge poles.

Similarly, as with upstanding poles, spreader poles come in different lengths straight up to very nearly four meters long and are likewise offered in both alloy with twisted lock expansion, and steel with wing or ‘T’ nut adjustment.

The composite poles typically have plastic end inserts, which are somewhat kinder on tent stuff than the flat parts of the steel poles. Also, similar to the upstanding poles, manufacturers provide the round range. This is on the grounds that they’re good with various optional fittings and spare parts.


There’s no reason for having durable poles and a lot of guy ropes to use the short and thin pegs that are incorporated with numerous shelters.

Leave a Reply

Your email address will not be published. Required fields are marked *